Re: [Xen-users] can't get multiple VLANs to work

[Sébastien CRAMATTE <s.cramatte@xxxxxxxxxx>]

Angel L. Mateo a écrit :
> Hello,
>
>         I have Xen running with domUs in different VLAN's. I have xen on a
> debian sarge server. My configuration is:
>
> * In dom0, I have a bridge for each vlan (different than the native vlan
> of interface eth0, that I don't need to tag). For each vlan the
> configuration is (for vlan 302):
>
> vconfig add eth0 302
> /etc/xen/scripts/network-bridge start netdev=eth0.302 bridge=xen-br302
> antispoof=no
> /sbin/ifconfig eth0.302 up
>
> * In the domU the configuration I have is:
>
> vif = [ 'bridge=xen-br302' ]
>
> * The only problem is that un domU I have to run "/usr/sbin/ethtool -K
> eth0 tx off" after bring it up.
>         
>   
You don't have problem with UDP ?
Have you DNS or DHCP services running in your  VMs ?

For my own  I loose UDP  traffic If I try to setup one vlan per bridge 
in the DOM0
To resolve this I must setup VLAN in each  VM

Have you test bonding + vlans ?

Regards

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users