Using config file "./4583-orig". Started domain 4583-orig (id=13) Linux version 2.6.32.16-oe64-00000-g9787330-dirty (root@compiler) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #18 SMP Thu Jul 15 11:55:57 CEST 2010 Command line: initrd=/b4583/boot/initrd4.gz loglevel=10 debug console=ttyS0,115200n8 max_loop=255 ramdisk_size=131072 root=/dev/ram0 rw load=xarch64.lzm ver=b4583 sgnfile=stmp.iufIsOgk rcpy=/b4583/changes.img maxcpus=32 menu=vmlinuz4.0 vmalloc=384M BOOT_IMAGE=/b4583/boot/vmlinuz4 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000020000000 (usable) BIOS-e820: 00000000fc000000 - 0000000100000000 (reserved) DMI 2.4 present. last_pfn = 0x20000 max_arch_pfn = 0x400000000 MTRR default type: write-back MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF write-combining C0000-FFFFF write-back MTRR variable ranges enabled: 0 base 0000F0000000 mask FFFFF8000000 uncachable 1 base 0000F8000000 mask FFFFFC000000 uncachable 2 disabled 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled TOM2: 0000000130000000 aka 4864M x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-0000000020000000 0000000000 - 0020000000 page 2M kernel direct mapping tables up to 20000000 @ 8000-a000 RAMDISK: 1fb8e000 - 1fffed7a ACPI: RSDP 00000000000ea020 00024 (v02 Xen) ACPI: XSDT 00000000fc012cb0 00034 (v01 Xen HVM 00000000 HVML 00000000) ACPI: FACP 00000000fc012ad0 000F4 (v04 Xen HVM 00000000 HVML 00000000) ACPI: DSDT 00000000fc002c40 0FE0B (v02 Xen HVM 00000000 INTL 20061109) ACPI: FACS 00000000fc002c00 00040 ACPI: APIC 00000000fc012bd0 000D8 (v02 Xen HVM 00000000 HVML 00000000) ACPI: Local APIC address 0xfee00000 (6 early reservations) ==> bootmem [0000000000 - 0020000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0001000000 - 00019d1098] TEXT DATA BSS ==> [0001000000 - 00019d1098] #3 [001fb8e000 - 001fffed7a] RAMDISK ==> [001fb8e000 - 001fffed7a] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #5 [00019d2000 - 00019d20a1] BRK ==> [00019d2000 - 00019d20a1] found SMP MP-table at [ffff8800000fbc80] fbc80 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x00020000 On node 0 totalpages: 130975 DMA zone: 56 pages used for memmap DMA zone: 99 pages reserved DMA zone: 3844 pages, LIFO batch:0 DMA32 zone: 1736 pages used for memmap DMA32 zone: 125240 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x1f48 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] disabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x08] disabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x0a] disabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x0c] disabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x0e] disabled) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x10] disabled) ACPI: LAPIC (acpi_id[0x09] lapic_id[0x12] disabled) ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x14] disabled) ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x16] disabled) ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x18] disabled) ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x1a] disabled) ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x1c] disabled) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-47 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 low level) ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level) ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ5 used by override. ACPI: IRQ9 used by override. ACPI: IRQ10 used by override. ACPI: IRQ11 used by override. Using ACPI (MADT) for SMP configuration information SMP: Allowing 15 CPUs, 13 hotplug CPUs nr_irqs_gsi: 48 Xen version 4.0. Xen Platform PCI: I/O protocol version 1 HVMOP_pagetable_dying not supported Allocating PCI resources starting at 20000000 (gap: 20000000:dc000000) Booting paravirtualized kernel on Xen NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:15 nr_node_ids:1 PERCPU: Embedded 27 pages/cpu @ffff880001a00000 s79384 r8192 d23016 u131072 pcpu-alloc: s79384 r8192 d23016 u131072 alloc=1*2097152 pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 -- Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129084 Kernel command line: initrd=/b4583/boot/initrd4.gz loglevel=10 debug console=ttyS0,115200n8 max_loop=255 ramdisk_size=131072 root=/dev/ram0 rw load=xarch64.lzm ver=b4583 sgnfile=stmp.iufIsOgk rcpy=/b4583/changes.img maxcpus=32 menu=vmlinuz4.0 vmalloc=384M BOOT_IMAGE=/b4583/boot/vmlinuz4 PID hash table entries: 2048 (order: 2, 16384 bytes) Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) Initializing CPU#0 Checking aperture... No AGP bridge found Memory: 498924k/524288k available (5609k kernel code, 388k absent, 24244k reserved, 2978k data, 548k init) Hierarchical RCU implementation. NR_IRQS:1536 Xen HVM callback vector for event delivery is enabled Console: colour VGA+ 80x25 console [ttyS0] enabled Xen: using vcpuop timer interface installing Xen timer for CPU 0 Detected 2611.720 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 5223.44 BogoMIPS (lpj=26117200) Security Framework initialized Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) tseg: 0000000000 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 using C1E aware idle routine Performance Events: AMD PMU driver. ... version: 0 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose events: 0 ... event mask: 000000000000000f ACPI: Core revision 20090903 Setting APIC routing to physical flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 CPU0: AMD Athlon(tm) II X4 620 Processor stepping 02 Booting processor 1 APIC 0x2 ip 0x6000 Initializing CPU#1 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 2 installing Xen timer for CPU 1 CPU1: AMD Athlon(tm) II X4 620 Processor stepping 02 Brought up 2 CPUs Total of 2 processors activated (10448.55 BogoMIPS). WORM: version 0.8 initializing WORM: started with WORM protection turned off by default xor: automatically using best checksumming function: generic_sse generic_sse: 1439.200 MB/sec xor: using function: generic_sse (1439.200 MB/sec) NET: Registered protocol family 16 ACPI: bus type pci registered dca service started, version 1.12.1 PCI: Using configuration type 1 for base access PCI: Using configuration type 1 for extended access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:01.1: reg 20 io port: [0xc420-0xc42f] pci 0000:00:01.2: reg 20 io port: [0xc400-0xc41f] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug, * this clock source is slow. Consider trying other clock sources pci 0000:00:01.3: quirk: region 1f40-1f7f claimed by PIIX4 ACPI pci 0000:00:02.0: reg 10 32bit mmio pref: [0xf0000000-0xf1ffffff] pci 0000:00:02.0: reg 14 32bit mmio: [0xf3000000-0xf3000fff] pci 0000:00:03.0: reg 10 io port: [0xc000-0xc0ff] pci 0000:00:03.0: reg 14 32bit mmio pref: [0xf2000000-0xf2ffffff] pci 0000:00:04.0: reg 10 io port: [0xc100-0xc1ff] pci 0000:00:04.0: reg 14 32bit mmio: [0xf3001000-0xf30010ff] pci 0000:00:05.0: reg 10 io port: [0xc200-0xc2ff] pci 0000:00:05.0: reg 14 32bit mmio: [0xf3001100-0xf30011ff] pci 0000:00:06.0: reg 10 io port: [0xc300-0xc3ff] pci 0000:00:06.0: reg 14 32bit mmio: [0xf3001200-0xf30012ff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs *5 10 11) ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs *5 10 11) vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb raid6: int64x1 2021 MB/s raid6: int64x2 3086 MB/s raid6: int64x4 3389 MB/s raid6: int64x8 2290 MB/s raid6: sse2x1 3000 MB/s raid6: sse2x2 4376 MB/s raid6: sse2x4 4619 MB/s raid6: using algorithm sse2x4 (4619 MB/s) PCI: Using ACPI for IRQ routing Switching to clocksource xen pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered system 00:00: iomem range 0x0-0x9ffff could not be reserved system 00:02: ioport range 0x10c0-0x1141 has been reserved system 00:02: ioport range 0xb044-0xb047 has been reserved system 00:03: ioport range 0x8a0-0x8a3 has been reserved system 00:03: ioport range 0xcc0-0xccf has been reserved system 00:03: ioport range 0x4d0-0x4d1 has been reserved pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 3, 32768 bytes) TCP established hash table entries: 16384 (order: 6, 262144 bytes) TCP bind hash table entries: 16384 (order: 6, 262144 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered NET: Registered protocol family 1 RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. pci 0000:00:01.0: PIIX3: Enabling Passive Release pci 0000:00:00.0: Limiting direct PCI/PCI transfers pci 0000:00:01.0: Activating ISA DMA hang workarounds pci 0000:00:02.0: Boot video device Trying to unpack rootfs image as initramfs... Freeing initrd memory: 4547k freed microcode: no support for this CPU vendor audit: initializing netlink socket (disabled) type=2000 audit(1279190067.107:1): initialized VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) squashfs: version 4.0 (2009/01/31) Phillip Lougher Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx). SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled SGI XFS Quota Management subsystem msgmni has been set to 984 alg: No test for stdrng (krng) async_tx: api initialized (async) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered (default) io scheduler cfq registered vga16fb: initializing vga16fb: mapped to 0xffff8800000a0000 Console: switching to colour frame buffer device 80x30 fb0: VGA16 VGA frame buffer device Event-channel device installed. ------------[ cut here ]------------ kernel BUG at drivers/xen/balloon.c:528! invalid opcode: 0000 [#1] SMP last sysfs file: CPU 1 Modules linked in: Pid: 1, comm: swapper Not tainted 2.6.32.16-oe64-00000-g9787330-dirty #18 HVM domU RIP: 0010:[] [] dealloc_pte_fn+0x9c/0xa0 RSP: 0018:ffff88001f4a3d90 EFLAGS: 00010296 RAX: 00000000ffffffff RBX: ffff88001e000ff8 RCX: 0000000000000000 RDX: ffff88001e000f01 RSI: ffff88001f4a3d90 RDI: 0000000000000001 RBP: ffff88001e001000 R08: 0000000000000000 R09: 0000000000000000 R10: 000000000001c888 R11: 0000000000000001 R12: ffff88001e1ff000 R13: ffff880002465000 R14: ffff88001e200000 R15: ffff880001006780 FS: 0000000000000000(0000) GS:ffff880001a20000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 0000000000000000 CR3: 0000000001001000 CR4: 00000000000006a0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process swapper (pid: 1, threadinfo ffff88001f4a2000, task ffff88001f4a17d0) Stack: ffff88001f4a3db8 0000000000000001 0000000000000000 0000000000007ff0 <0> 0000000000000002 0000000217461006 ffff88001e000ff8 ffff88001e001000 <0> ffff88001e1ff000 ffffffff810a68cf 000201d000000010 0000000000000000 Call Trace: [] ? apply_to_page_range+0x2bf/0x410 [] ? dealloc_pte_fn+0x0/0xa0 [] ? alloc_empty_pages_and_pagevec+0xf8/0x1e0 [] ? netback_init+0x137/0x420 [] ? netback_init+0x0/0x420 [] ? do_one_initcall+0x27/0x180 [] ? kernel_init+0x160/0x1c0 [] ? early_idt_handler+0x0/0x71 [] ? child_rip+0xa/0x20 [] ? early_idt_handler+0x0/0x71 [] ? kernel_init+0x0/0x1c0 [] ? child_rip+0x0/0x20 Code: c7 c6 ff ff ff ff 48 c1 ef 0c e8 e0 d8 d0 ff bf 01 00 00 00 48 89 e6 e8 33 94 d0 ff ff c8 75 0b 48 83 c4 30 31 c0 5b 5d 41 5c c3 <0f> 0b eb fe 53 48 8b 9f a0 00 00 00 48 85 f6 48 89 f1 0f 95 c2 RIP [] dealloc_pte_fn+0x9c/0xa0 RSP ---[ end trace a7919e7f17c0a725 ]--- Kernel panic - not syncing: Attempted to kill init! Pid: 1, comm: swapper Tainted: G D 2.6.32.16-oe64-00000-g9787330-dirty #18