[Xen-devel] Re: loop devices - Xen 3.0.3 problem?

[Tomasz Chmielewski <mangoo@xxxxxxxx>]

> > When I try to create bridge 4
> >
> > /etc/xen/scripts/network-bridge vifnum=4 start
> >
> >  
> >
> > Link veth4 is missing.
> >
> > I tried increasing the loopback devices in the kernel boot command line using 
> > netloop.nloopbacks=64
> > And also with max_loop=64, but neither worked.
> The former should work if the driver is built into your kernel. If it's not I'm 
> not sure if module loading picks up options from the boot-time command line. 
> You might need to add a line to your modules.conf or to the line that manually 
> loads netloop.
I also have this problem, it started with an upgrade to 3.0.3.

Trying to bring up a vifnum 4 or bigger results in that error (Link 
veth4 is missing).
It doesn't work when loop is in the kernel, and when is built as a module.
In fact, I tried to build it as a module, and then do:

# modprobe loop max_loop=256
# dmesg|grep loop
loop: loaded (max 256 devices)
# /etc/init.d/xend start

But it will always say that "Link veth4 is missing" if I start something 
like "/etc/xen/scripts/network-bridge vifnum=4 start".
--
Tomasz Chmielewski
http://wpkg.org


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel